Product Introduction
The spray robot can atomize a variety of disinfectants, and disperse thick droplets of mist into the disinfection area through high-speed airflow to achieve disinfection. The robot can autonomously navigate, avoid obstacles and move to the disinfection area, and perform 360-degree dead angle disinfection around the disinfection target.
The sterilization method of the robot atomization disinfection solution can achieve human-machine separation, reduce personnel contact, and effectively reduce the risk of infection, which not only makes sterilization and disinfection more efficient and thorough, but also greatly improves safety.
Product Advantage
(1) Functions: It integrates all functions of space sterilization, floor cleaning, vacuuming and dust pushing
(2) Battery: 75Ah lithium battery, providing up to 8 hours of battery life, fast charging and quick use, to meet the needs of two shifts a day
(3) Cleaning ability: 800mm cleaning width, 150-200mm more working width than the same type of cleaning robot (typ600mm), cleaning efficiency increased by 25%
(4) Robot body design: 675mm diameter body,strengthen pass performance,and reserved for the navigation layer more algorithm strategy feasibility ;Cylindrical fuselage provides extended edge cleaning and zero-turn radius navigation and obstacle avoidance safety
(5)Cleaning ability: Using advanced atomization method, high atomization efficiency, good effect
(6) Large working space：Multi-angle three-dimensional spraying with automatic lifting nozzle, 360 degrees without dead angle,disinfection area reach to 10000 ㎡
(7) No harmful residues: The robot disinfection final decomposition products of special disinfection preparations are water vapor and oxygen, which are non-toxic by-products.
(8) Wide range of disinfection: It has a broad-spectrum bactericidal effect and is used for disinfection of fungi, bacteria, viruses and spores
(9) Unmanned work: The robot has an independent working mode, which can work autonomously according to the set route and time, and can achieve regular, fixed-point, multi-track mobile disinfection and sterilization in a large environment. Reduced manpower input and improved work efficiency and quality.
(10) Autonomous charging：The robot can realize autonomous charging cycle work, low battery warning and automatic recharge, which effectively solves the problem of space life of mobile devices.
(11) Autonomous navigation: Dry mist disinfection robot with multi-sensor fusion navigation solution to achieve precise positioning and dynamic path planning in the spatial range.
(12) Intelligent obstacle avoidance: Auto disinfection robot equipped with the latest lidar, ultrasonic, and air collision sensors to provide multiple protection and effectively respond to various complex environments.
(13) Internet of Everything: Automatic uv disinfection and sterilization robot support people and things, information exchange and communication between things, and work in coordination with the environment.
(14) Multi-machine linkage: Multiple robots or multiple things devices can achieve linkage and collaborative work, effectively improving work efficiency and application scope
Cleaning and Disinfection Robot
1. Size 675(L)×988(W)×1387(H)
2. Weight: 111Kg
3. Working voltage: 48V
4. Battery capacity: 72Ah
5. Battery endurance time: 6-8h
6. Human-computer interaction screen size: 7 inches
7. Touch mode of computer interactive screen: capacitive touch
8. Running noise: <65dBA
9. Applicable environment: 0~40°C Relative humidity: 0%~80%10.
Continuous low doses of far-ultraviolet C (far-UVC) light can kill airborne flu viruses without harming human tissues, according to a new study at the Center for Radiological Research at Columbia University Irving Medical Center (New York, NY).1 The findings suggest that use of overhead far-UVC light in hospitals, doctors’ offices, schools, airports, airplanes, and other public spaces could provide a powerful check on seasonal influenza epidemics, as well as influenza pandemics.